tom stogdon
home | wall sculptures | 3D sculptures | exhibitions | studio | newsletter | about | contact

3D Sculptures

wall rolled and etched steel, slate
approximate dimensions 90cm x 20cm x 6cm

Skyline II  
   
wall rolled and etched steel, slate, marble and copper
approximate dimensions 100cm diameter x 6cm deep

Two Skylines  
   
wall rolled bronze and slate
1.6m diameter x 11cm deep

Pipeline Series - Bronze Ring I  
   
wall steel armature, cotswold sandstone, oak
approximate dimensions 75cm diameter, total height 1.7m

Sandstone Ammonite III  
   
wall rolled and polished steel and slate
approximate dimensions: 60cm diameter x 8cm deep

Pipeline Series - Cores I  
   
wall quarried sandstone near tetbury, gloucestershire
approximate dimensions 1.4m diameter x 30cm deep

Sandstone Overlap I  
   
wall etched and rolled copper pipe, inlaid with worked slate
approximate dimensions 15cm x 18cm

Etched Copper Pipeline I  
   
wall etched copper, rolled into pipe, worked slate
approximate dimensions 21cm x 8cm

Inside Out - Pipeline Series  
   
wall welsh quarry slate worked and drilled, steel armature, straight to ground
approximate dimensions 100cm diameter x 35cm deep tapering to 10cm

Overlap V  
   
wall rolled and etched steel
green chinese sandstone river pebbles, english oak
approximate dimensions 60cm diameter x 10cm deep

Two Circles  
   
wall lake district broughton moor green slate with white veining, carved rill and inlaid loose slate buttons
dimensions 1800mm x 900mm x 720mm

Counting Table  
   
wall rolled and etched steel, reclaimed and reworked welsh roofing slate, reclaimed oak roofing beam.
approximate dimensions 50cm diameter x 16cm deep

Metropolis Series II  
   
wall as before
Slate Rill - detail  
   
wall reclaimed and reworked roof slate
fabricated, galvanised and etched steel
approximate dimensions 2.4m tall x 40cm wide x 16cm deep

Slate Rill  
   
wall welsh slate, scottish cobbles, turkish marble on rusted steel poles
approximate dimensions 35cm x 200cm, 40cm x 170cm, 50cm x 185cm

Elevated Rings  
   
wall drilled green chinese sandstone,
steel armature, etched steel poles.
triptic
dimensions 35cm x 175cm, 50cm x 175cm, 60cm x 200cm

Chinese Sandstone Circles  
   
wall galvanized and etched steel rings inlaid with
worked welsh and cumbrian roof slates
Ranelagh School, Berkshire.

Two Circles II  
   
wall rusted steel pipe section, inlaid with worked slate, various origins...cumbria, cornwall and wales
dimensions 70cm diameter

Metropolis  
   
wall paddled and drilled cumbrian slate ammonite on
found driftwood sea groyne (kent coast line)
dimensions 360mm diameter, total height 1,500mm.

Green Slate Driftwood Ammonite  
   
wall welsh quarry slate worked, paddled and drilled, steel armature
dimensions 1000mm diameter.

Overlap lll  
   
wall dark grey welsh slate columns
cut and worked green, grey and heather roof slates.
secured to floor with steel brace and pins.

Standing Stones  
   
wall welsh quarry slate, tumbled and drilled,
steel armature twisted and spiked to ground
dimensions 2,500mm above ground.

Twister Chelsea  
   
wall found rusted iron hoop, reclaimed and worked mixed welsh,cornish,cumbrian & spanish roof slates
dimensions 1,450 mm diameter


Pipeline Series - Large Hoop  
   
wall japanese green sandstone pebbles, drilled and threaded onto
galvanised steel armature, mounted on french oak base.
dimensions 400mm diameter, 940mm tall including wood.

Japanese Sandstone Overlap  
   
wall chelsea flower show sculptures
including carved slate button channel, overlap lll, pipeline, twister and alphabet series.

Chelsea Garden 2008  
   
wall reclaimed iron water pipe,
reclaimed cornish roofing slates
approximate dimensions 20cm diameter

In the Pipeline 1  
   
wall drilled and graded chinese sandstone ammonite
fed onto steel armature and copper rod
approximate dimensions 35cm diameter.

Chinese Sandstone Ammonite  
   
wall tumbled and drilled welsh mountain slate,
mild steel core, and mounted into oak base.
Dimensions approx. 90cm diameter from base of stone.

sold but similiar available to commission
overlap ii  
   
wall steel armature, threaded with drilled welsh slate
approximately 10ft

Garden Twister  
   
wall steel armature, threaded with drilled green and blue welsh slate
approximately 12ft

Looped Twister  
   
wall hand cut and smoothed green slate button
Button  
   
wall drilled & paddled slate on steel armature
approximate dimensions 60cm x 30cm x 66cm high

Relaxing Slate  
   
wall drilled & paddled slate mounted on scorched and waxed oak
slate 30cm x 22cm oak 40cm x 16cm x 20cm

Scorched Oak & Slate  
   
wall drilled slate, tapered stainless steel armature
approximate dimensions 5ft tall from block

Sail 1  
   
wall preserved magnolia leaves covering a steel and wood frame
lifesize

Leaf Armchair  
   
wall lifesize armchair, with an iron armature and covered in birch and copper wire, base planted with sedum

Birch & Iron Armchair  
   
wall 60cm square wall hanging
ripped and hammered lead with inlaid preserved magnolia leaves

Lead & Leaf  
   
wall birch copper and steel armature with planted seat base
6ft tall

Lovers Chairs  
   
wall Corkscrew (Putney)
drilled pale green slate and steel core armature on green oak base
8ft tall x 2.5ft at widest point

Corkscrew  
   
wall steel armature, carved oak, paddled sea slate
dimensions 90cm high x 60cm wide



Slate Ammonite on Aged Oak  
   
wall paddled slate and steel
approximate dimensions 100cm x 8cm



Wiggle Twister